Intermec SG20B - Page 66

Chapter 5 — Connect and Configure the SG20B Scanner in Direct Connection
54 SG20B Cordless Scanner + Bluetooth Base Station User’s Guide
where BDA is the scanner’s Bluetooth Device Address (by
default - name can be changed).
You can find the BDA on the scanner’s label.
SG20B BDA: The scanner BDA can be found on the scanner’s label
• Select your scanner and validate.
If a PIN is required (depending on your host operating system
and Bluetooth version), enter the default Bluetooth PIN (0000)
and validate. The blue Intermec Ready-to-Work indicator starts
blinking rapidly, indicating that the scanner is awaiting
acknowledgment.
• Pull the trigger.
Your scanner is now paired with your host. Two virtual
Standard serial ports over Bluetooth link (incoming and
outgoing) are created.
4 Note the outgoing COM port number, for example, by opening
the Bluetooth settings from the Bluetooth icon in the taskbar or
the operating system Device Manager.
Intermec Technologies Corp.
Everett, WA 98203
BDA: XXXXXXXXXXXXXXX
CN: SG20T1D-XXXXXX
12584563214587
Contains TX FCC ID: HN2-BTM311
MEX SCT RCPACBT05-068
IC: ICES-003 CLASS B
IC: 1223A-BTM311
ANATEL: 1192-06-0569
ݭɼ૦ծ
MODEL, , : SG20
5V 1.7A
Made in Singapore
MFD , : YY/MM/DD
Intermec Technologies Corp.
Everett, WA 98203
12584563214587
IC: ICES-003 CLASS B
MFD , : YY/MM/DD
MODEL, , : SG20B
5V 1.7A
Made in Singapore
ݭɼ૦ծ
BDA: XXXXXXXXXXXX
CN: SG20B1D-XXXXXX
BDA: XXXXXXXXXXXXXXX
Note: If the scanner does not appear in the list, it might be already
paired with the host. Under some operating systems, paired devices do
not appear in the Bluetooth device search list.