SECTION 9 " Extended Commands
9-6 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Table 9-1 (Continued)
Transmit and Receive Characters
Line 1, Columns 2--24
Column DescriptionCharacter *
17--18
XX
Number of delimiter characters.
Number of characters accepted before sending return
code to host. Range is 00--99. Default of 00 implies no
start character.
19--20
AA
Start character.
Hexadecimal ASCII code. Range is 00--99. Default of 00
implies no start character.
21
F
(Space)
Return start character to host.
Return character.
Do not return character.
22
P
(Space)
Flag parity errors.
Flag.
Do not flag.
23--24
XX
Receive timeout length.
Number of seconds the wireless station waits for input
from the RS-232 port before it sends a timeout error.
Uses a default of 5 seconds when field is filled with
spaces.
* Some wireless stations do not support some characters. Refer to the wireless
station’s user guide for supported characters and options.
To Next Page
Loading...