97Chapter 11 Settings
Wireless LAN Setting
You can adjust a roaming level to nd the best access point signal
within close proximity to each other while moving around.
1. Press
> Settings > Wireless LAN Setting.
2. Enter your security code and press
.
The preset code is "0000".
3. Press the navigation key left or right to select a roaming level.
The higher the value of the roaming level can be found access
point easily. You are in network coverage, your phone attempts to
nd a signal depending on the setting value.
4. Press
to apply the setting.
Security
All of your phone’s security settings are available through the secu-
rity menu which helps you to protect against unauthorized users.
1. Press
> Settings > Security.
2. Enter your security code and press
to display the security menu.
You must enter your security code to view the security menu.
The preset code is "0000", use this you can access to the security
menu for the rst time.
3. Security has 6 sub-menus and displayed , select one item from each
of the following menus to set:
Lock phone to prevent access by unauthorized users. When your
phone is locked, you can only answer calls.
Change codes to change your security code to whatever you like.
(Enter and reenter your new security code, pressing
after each.)
Wireless LAN Status
This menu allows you to view the specic information about the
wireless LAN.
1. Press
> Settings > Wireless LAN Status.
2. Displays the wireless LAN MAC, SSID, Signal, security, and channel.
3. Read the information provided on the phone’s display and press
to return to the previous menu.
To Next Page
Loading...
