27Chapter 2 Getting Started
Signal Strength
Call quality depends on the signal strength in your area. The signal
strength is indicated on the screen as the number of bars next to the
Antenna icon. The more bars shown, the better the signal strength. If
the phone is out of range of your access point, “Out of range” will be
displayed on the screen. If you go out of access point range, the con-
nection will be lost. When in range again, you can reconnect.
Access Point Probing
The phone has an ability to detect all reachable access points. Your
phone’s display shows a list of the SSIDs
congured in the access
points from which to choose (50 maximum).
To detect an access point:
Ź In standby mode, press navigation key up ( ) to search wireless LAN
around your phone.
After a few seconds, the list of SSIDs congured in the access
points are displayed. You can choose one of them under this
preference.
Caller ID
Caller ID lets you know who is calling by displaying the number of
the person calling when your phone rings.
Cleaning Phone
Use the soft cloth to gently wipe the display screen and the case.
To clean the phone:
Ź Unplug all cables, such as headset, power adapter and turn o the
phone (press and hold
).
To clean the metallic part of phone, such as charging contacts of
charger and battery wipe them with a pencil eraser or cotton swab.
Avoid getting moisture in openings.
Clean the phone with a damp (not wet) cloth, or an antistatic wipe.
Never use a dry cloth as this may cause a static shock.
Do not use window cleaner household cleaners, household polish,
aerosol sprays, solvents, alcohol, ammonia, benzene, thinner, or
abrasives to clean the phone as this will damage the product.
To Next Page
Loading...