iPECS WIT-400HE - Using Quickly Change Mode

35Chapter 3 Phone Calls
Using Quickly Change Mode
Activating Manner Mode (Quickly Set to Vibrate)
You can use the manner mode in public places.
To activate the manner mode quickly:
Ź From standby mode, activate the manner mode quickly by pressing
for 3 seconds. When the manner mode is set, the key tones are
silent, and the phone is set to vibrate.
 Manner mode is on, the
icon appears on the standby mode.
 The phone remains in manner mode even if you turn it o and back on .
To release the manner mode:
Ź Press for 3 seconds to switch into normal mode.
Activating Lock Mode
You can use the lock mode to prevent others from using your phone.
When your phone is locked, you can only receive incoming calls or
make calls to emergency number.
To activate the lock mode quickly:
1. From standby mode, press within 3 seconds. "Lock mode on?" is
displayed.
2. Select Ye s to conrm and press
, or select No to return to the previ-
ous menu.
 When phone lock mode is enabled, the keypad will automatically
lock on and the phone will prompt you to enter a security code.
 Icon
and LOCK STATUS are displayed on the standby mode.
To release the temporary lock mode:
1. From standby, press to choose Unlock.
 Security Code window will pop up.
2. Enter your security code as it is a required eld and then press
.
 However, the phone will automatically lock up again after 10
seconds unless you change lock phone setting to "O".
 If you release the lock mode permanetly see “To release the perma-
nent lock mode” on page 36.