34 Chapter 3 Phone Calls
Answering Calls
When the phone rings or vibrates, press . If the headset provided
is plugged to the phone, you can also answer an incoming call by
pressing the mic button on the headset when the ring sounds.
1. In standby mode,
2. Press
, to answer an incoming call. Depending on your settings,
you may also answer incoming calls by pressing any number key.
Your phone noties you of incoming calls by any combination
of ringing or vibrating, the backlight illuminating, or the screen
displaying an incoming call message.
If the incoming call is from a number stored in your Phone Book,
the entry’s name is displayed. The caller’s phone number may also
be displayed, if available.
Caller Groups can be distinguished with a dierent ring type.
Note: Screen can display numbers with a maximum of 16 digits, so
if the phone number (where the call was received) consist of more
than 9 digits the call time is not displayed.
Ending a Call
When the conversation is over, press to end an active call.
Or
1. Press Menu (left softkey) to display the options.
2. Select End and press
.
The phone number will be saved to the call list. Press
to access
the call list and then select an entry. Press
to save a number
that is not in your Phone Book.
In Call Options
Press during a call to display a list of available. To select an
option, highlight it and press
. The following options may be
available:
End to end a call.
Main menu to display the main menu of some of the phone, such
as Phone Book or Call List.
To Next Page
Loading...
