iPECS WIT-400HE - System Speed; Storing a Speed Dial

74 Chapter 9 Tools
Timer
The timer can be used for various calendrical calculations.
Using the D-Day Finder
You can calculate what date it will be in a number of days after a
particular date.
1. Press
> Tools > Timer.
2. Select D-day Finder and press
.
3. Enter date from and add a number of days to calculate a future date
and press
to get the result.
4. Press Reset (left softkey) to set the nder back to zero.
Using the D-Day Counter
You can use d-day counter to refer to the day that is chosen for the
beginning of an important event.
To set a D-day counter:
1. Press > Tools > Timer.
2. Select D-day Counter and press
.
3. Press Add (right softkey).
4. Enter a title for an upcoming event by highlighting title eld.
 Enter the event counter title. (See "Entering Text" on page 18.)
5. Select a d-day for the event counter by highlighting the time eld.
6. Press
to save the counter.
To view a D-day counter:
1. Press > Tools > Timer.
2. Select D-day Counter and press
.
3. The list of saved counters will be displayed. Scroll through the list
and select one.
4. Read the information about the counter.
To edit a D-day counter:
1. Press > Tools > Timer.
2. Select D-day Counter and press
.