EasyManua.ls Logo

iPECS WIT-400HE - Dialing With Speed Dial

iPECS WIT-400HE
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25Chapter 2 Getting Started
5 Continuous call Long term call(longer 12 hours) should
be supported.
6 Roaming within same
kind of AP
Seamless handover/roaming should be
supported. AP should support IAPP for
roaming between APs.
7 Trac distance Longer than 200 meters.
8 Antenna diversity More than 2 antennas.
9 AP manager AP manager can some conguration like
channel, SSID, WEP key, and so on.
10 European CE Type Ap-
proval
CE should be approved for European
market.
11 USA UL Type Approval UL should be approved for USA market.
12 USA FCC Type Approval FCC should be approved for USA market.
13 Canada CSA Type Ap-
proval
CSA should be approved for Canada
market.
14 Korea MIC Type Approval MIC should be approved for Korea
market.
15 WiFi certication WiFi should be certied for mutual
compatibility.
16 RF power control Fixed power and auto power should be
supported.
17 DHCP, NAT DHCP and NAT should be supported.
18 QoS Voice packet should be handled with
high priority. IEEE802.11e should be
supported.
Registration
This phone is one of the iPECS phones recognized by the iPECS
system. Therefore, your phone must be registered with the iPECS
system for successful call processing.
The registration is accomplished in two phases; the rst phase is
Wireless LAN Connection, and the second is System Setting.

Table of Contents

Other manuals for iPECS WIT-400HE