iPECS WIT-400HE - Creating a Group

42 Chapter 4 Phone Book
Changing a Ring Tone
1. Press > Phone Book > Caller Groups.
2. Scroll to view ring tones assigned to the group and select one.
3. Press Menu (left softkey) to display the options.
4. Select Modify melody and press
.
5. Scroll through the list of ring tones and select one.
6. Press
to apply the ring tone.
Removing a Ring Tone from the Group
1. Press > Phone Book > Caller Groups.
2. Select the group from which you wish to remove a ring tone.
3. Press Menu (left softkey) to display the options.
4. Select Unset melody and press
.
5. Select Ye s to conrm and press
.
Creating a Group
You can create up to 30 caller groups, and their names can be up to
16 characters long.
1. Press
> Phone Book > Caller Groups.
2. Press Menu (left softkey) to display the options.
3. Select Add and press
.
4. To assign a name to the group, enter the caller group name using the
keypad.
 When you enter the group name, as soon as you see the text input
rate on the top of the left side of the screen.
5. Press
to add a group.
 If you do not assign a name, the screen will briey show "Write
group name".