iPECS WIT-400HE - Display

43Chapter 4 Phone Book
Editing a Group
You can edit a group except for default groups.
1. Press
> Phone Book > Caller Groups.
2. From the caller groups, select one.
3. Press Menu (left softkey) to display the options.
 Press Change (right softkey) to directly access the edit mode.
4. Select Edit and press
.
5. To edit a name to the group, change the name using the keypad.
6. Press
to save.
Deleting a Group
You can delete a group except for default groups.
1. Press
> Phone Book > Caller Groups.
2. Select a group you wish to delete.
3. Press Menu (left softkey) to display the options.
4. Select Delete and press
.
5. Select Ye s to conrm and press
.
 The numbers that existing in the group move to the No group
when the group is deleted.
Adding Group Members
You can add group members that have a connect number to your
group by selecting them from contact entries.
1. Press
> Phone Book > Caller Groups.
2. From the caller groups, select one and press
.
3. Press Add (right softkey). If the group has more than one number
stored, press Menu (left softkey) to display the options.
4. Select desired entry and press Add (right softkey) again to save
the group.
 To deselect a entry, select it and press
to unselect.
 A check mark
appears next to each selected member.
 Press Menu (left softkey) to display the options.