iPECS WIT-400HE - Add New; Creating a Contacts Entry

38 Chapter 4 Phone Book
 You can enter or select an additional information for the entry,
other information is optional:
-
E-mail - E-mail address you assigned to the entry.
-
Group - Group you assigned to the entry.
-
Memo - Note, or other information that related to the entry.
Add New
This menu allows you to add a new contact address. You can enter
contact address information that includes name, phone number,
E-mail address, group information items, etc.
A name, number, and a contacts type are required for all contact
entries. Other information is optional. You may enter the information
in any order by scrolling through the entry details.
Creating a Contacts Entry
1. Press > Phone Book > Add New.
2. To assign the name to the new entry:
 Select Name eld and enter the name.
- The name of an contact entry can contain up to 32 characters.
- Your phone can store up to 500 contacts, each entry can consist
of one name, three dierent phone numbers.
3. To store a the number to the name:
 Select Number eld and enter the phone number being stored up
to 32 digits.
4. To assign a contact type to the number:
 Press Menu to select Select Type and press
.
 Press navigation key left or rignt to select a contact type Mobile,
Home, Oce, General, Pager, or Fax.
5. To assign more options to the number, proceed to steps 6 ~15.
Otherwise, skip to step 15. Scroll down to additional elds and enter
or edit information as desired.
6. To assign a speed dial to the number:
 Press Menu to select Speed dial and press
.
 Select an available speed dial location and press
.