iPECS WIT-400HE - Turning Your Phone On and Off

8 Chapter 1 Phone Basics
Key Functions
The following list gives a brief description of all available key func-
tions of your phone.
1. Earpiece lets you hear the caller.
2. Display Screen displays all the information needed to operate
your phone, such as the call status, the date and time, and the
signal and battery strength.
3. Navigation/OK (
) Key scrolls through the phone’s menu op-
tions and acts as a shortcut key from standby mode
*1
and selects
the highlighted choice when navigating through a menu.
 Press Up (
) to access Searching SSID.
 Press Down (
) to access Schedule.
 Press Left (
) to access System.
 Press Right (
) to access Messages.
4. Left Softkey
*2
lets you access menu tiems or select softkey ac-
tions corresponding to the bottom left line on the display screen.
5. Hold/Save Key allows you to place a call on hold. Use to save
your changes while in the programming mode.
6. Send key allows you to place or receive calls, or use call hisyorys.
7. Alphanumeric Keypad lets you enter numbers, characters, and
navigate within menus. Press and hold keys from 1 to 9 for speed
dialing.
8. Manner Mode allows you to ativate the vibration mode from
standby mode.
9. Mic lets you transmit your voice.
10. Right Softkey lets you access the contact list or select softkey
actions corresponding to the bottom right line on the display
screen.
11. Trans/PGM Key allows you to transfer an active call. Pressing
this key accesses the menu for making changes to the IP phone
conguration in standby mode.
12. End/Power Key lets you turn the phone on or o, end a call, or
return to standby mode. While in the main menu, it returns the
phone to standby mode and cancels your input.