Settings
USER MANUAL FPC 200 - 3/2017 143
4.3.2.4.1 Recording of online measurements
Recording is possible for a group of measurements
shown in Table view of selected online measurements
tab.
1. When desired online measurements tab is
opened, click on Recorder button at the
bottom of the page to open Measurements
Recorder window.
2. Select File name, Path and Data Type. If in
Data Type Values only is selected, only values
will be recorded, which is useful in case of
further arithmetic operations and analysis.
3. In Filter tab it is possible to filter selection of
measurements
4. Click Start Recording button to start recording.
5. When finished, click Stop Recording button.
If recording is stopped and later continued under the
same file name, data will be added to the same file. Pay
attention to close the file, before recording is restarted.
4.3.2.4.2 Copy (measurements)
Measurements can be copied to the clipboard for
further use or to be printed out on printer. There are
two copy options available for the data presented in
Table view:
Standard copy – copied data will be in the
same format as they are in table of
measurements,
Copy with separate unit – copied data will
have separated value and unit with Tab
character, which is useful in case of further
arithmetic operations.
If copy command is selected when data are presented in
Graphic view, picture of graphic view is saved in to the
clipboard.
To copy measurements table or graphical view (picture)
Choose one of the following:
Right-click on measurements table and select
Copy from context menu,
Press keys Ctrl+C.
To copy measurements with separate unit
Right-click on measurements table and select
Copy and separate unit from context menu.
To Next Page
Loading...