Jet JTS-600X User Manual

JTS-600X & JTS-600XL TCF
1, Model: JTS-600X, JTS-600XL Table Saw
2, Stock No. : 10000070XM/XT 10000070XLM/XLT
3, Brand: JET
4, Description of products (with photos)
 Heavy duty steel machine table completely
galvanized to avoid corrosion.
 Separate hand wheel for blade tilt up to 45°
with adjustable stop at 0°.
 Powerful induction motor with break to stop the
saw blade in seconds.
 A dia. 100mm dust port and upper dust
collection ensure best working conditions.
 Anodized aluminium table insert for precise
work piece support and reduced friction.
 A sliding table for max 1250mm crosscut and a
right table extension are on option.
 JTS-600X PHOTO
JTS-600XL PHOTO
5. Supplier
Qingdao Capital Resource Electric Co. LTD
6. Supplier’s model name
QCR Model: TS250, Ta250B Table Saw
7. Supplier’s CE declaration of conformity with latest directives and EN
standards (including comparison of supplier’s model to JPW’s model)

Jet JTS-600X Specifications

General

Type	Table Saw
Motor	1.5 HP
Blade Diameter	10 inches
Table Size	27 x 20 inches
Weight	90 lbs
Motor Power	1.5 HP
Voltage	120 V
Frequency	60 Hz
Cutting Capacity at 90 degrees	3-1/8 inches
Arbor Size	5/8 in
Dust Port	2-1/2 inches
Max Cutting Height at 90°	3-1/8 inches

Summary

Safety

Authorized Use

Details the intended purpose and restrictions for machine operation.

General Safety Notes

Provides essential safety guidelines for operating woodworking machinery.

Remaining Hazards

Machine Specifications

Technical Data

Lists detailed technical parameters of the machine.

Transport and Start Up

Assembly

Starting Operation

Machine Operation

Setup and Adjustments

Changing Saw Blade

Step-by-step instructions for replacing the saw blade.

Mounting the Riving Knife

Guidance on correctly installing and adjusting the riving knife.

Mounting the Saw Guard

Instructions for attaching and setting the saw guard.

Rising and Tilting Sawblade

Sliding Table Setup

Rip Fence Setup

Maintenance and Inspection

Troubleshooting

Safe Operation

Test Reports with Risk Analysis

Risk Analyses: Mechanical Hazards

Identifies and details mechanical hazards associated with the machine.

Risk Analyses: Electrical Hazards

Details electrical hazards and protective measures required.

Risk Analyses: Hazards Caused by Failure of Energy Supply

Risk Analyses: Hazards Caused by Missing/Incorrect Safety Measures