2) warning to wear ear protection to prevent hearing
loss; and
3) warning against the hazard of cutting when
handling saw blades, grooving tools, feeding wood
into the machine or doing maintenance;
4) warning not to try removing chips or workpieces
whilst the saw blade(s) is (are) running;
5) warning not to try using the machine unless all of
the guards and other safety devices necessary for
machining are in good working order.
d) instructions for safe use in accordance with EN ISO
12100:2010, 6.4.5.1 d). This includes the:
1) method to use manually operated tables (if
provided);
2) method to use and position rip fence as cross-cut
stop, for ripping solid wood, and for sawing panel;
3) method to use movable cross-cut fence;
4) method to use demountable power feed;
5) method for wedge cutting.
e) if necessary for stationary machines requirements for
the need to fix the machine to the floor and how this is
to be done;
f) for building site saws: take care that the machine is
placed only on stable and even surfaces;
g) for building site saws where optional lateral extension
tables are provided the instruction for their installation,
fixing and use;
h) for displaceable machines information regarding how
transportation shall be undertaken and how to make
the machine stable during cutting;
i) information concerning the correct method of lifting the
machine;
j) information that operators are adequately trained in the
use, adjustment and operation of the machine;
k) that only sharpened tools manufactured in accordance
To Next Page
Loading...
