Drawing –in or trapping hazard
Inherently safe machinery design
and construction and take
necessary protection measures:
1. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
2.Slot for the sawblade in the table
meets the requirement.
3. The sawblade below the table was
protected by fixed guards.
4. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
Inherently safe machinery design
and construction and take
necessary protection measures:
1. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
2.Slot for the sawblade in the table
meets the requirement.
3. The sawblade below the table was
protected by fixed guards.
4. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
Stabbing or puncture hazard
Friction or abrasion hazard
High pressure fluid injection hazard
Ejection of parts (of machinery and processed
materials/ workpieces)
Inherently safe machinery design
and construction, take necessary
protection measures and inform
users of the residual risks:
1.The PC guard have 3mm thickness
and the guard below the table made
of steel with 2mm thickness (ultimate
tensile:350N/mm
2
)
2. Required flanges are provided.
3. Required riving Knives (steel and
ultimate tensile: 580N mm
2
) and
indicated in the manual
4. Required fence is provided.
Loss of stability (of machinery and machine parts)
Inherently safe machinery design
and construction:
The weight of machine is more than
110kg, they are stable enough.
Slip, trip and fall hazards in relationship with machinery
(because of their mechanical nature)
Electrical hazards, caused for example by:
Electrical contact (direct or indirect)
Inherently safe machinery design
and construction:
Refer to Refer to EN 60204-1:1997
and EN1870-1:1999
To Next Page
Loading...
