Jet JTS-600X - Jts600

1.2
Shearing hazard
Inherently safe machinery design
and construction and take
necessary protection measures:
1. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
2.Slot for the sawblade in the table
meets the requirement.
3. The sawblade below the table was
protected by fixed guards and
interlocked guard.
4. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
5. All drive mechanisms are guarded
by a fixed guard.
1.3
Cutting or severing hazard
Inherently safe machinery design
and construction and take
necessary protection measures:
1.The PC guard have 3mm thickness
and the guard below the table made
of steel with 2mm thickness (ultimate
tensile:350N/mm
2
)
2. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
3.Slot for the sawblade in the table
meets the requirement.
4. The sawblade below the table was
protected by fixed guards.
5. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
6. Required flanges are provided.
1.4
Entanglement hazard
Inherently safe machinery design
and construction and take
necessary protection measures:
1. Required fence is provided.
2. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
3.Slot for the sawblade in the table
meets the requirement.
4. The sawblade below the table was
protected by fixed guards.
5. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
6. Required flanges are provided.