Jet JTS-600X - Test Reports with Risk Analysis; Risk Analyses: Mechanical Hazards

13. Test reports with risk analysis
Equipment: Table Saw
Type: TS250RC, TS250RS, TS250RC-B, TS250RS-B, TS250, TS250B
(Ser. No.: 20090500001, 20090500002, 20090500003, 20090500004,
20090500005, 20090500006)
Client: Qingdao Capital Resource Electric Co., Ltd.
Risk Analyses
Hazards
Measures
1
Mechanical hazards (caused for example by:
- shape
- relative location
- mass and stability (potential energy of elements),
- mass and velocity (kinetic energy of elements)
- inadequacy of the mechanical strength
- accumulation of potential energy by: elastic
elements (springs),or liquids or gases under
pressure, or vacuum of the machine parts of
workpieces)
See below
1.1
Crushing hazard
Inherently safe machinery design
and construction and take
necessary protection measures:
1. The weight of machine is more than
110kg, they are stable enough.
2. Request adjustable sawblade
guard is provided to guard that portion
of the sawblade above the table
3.Slot for the sawblade in the table
meets the requirement.
4.The sawblade below the table was
protected by fixed guards.
5. The hazardous moving parts
cannot be accessed through the
openings for the chip removal.
6.All drive mechanisms are guarded
by a fixed guard.