Jet JTS-600X - Jts600

Test Report No.: 17702074 003
Part I of II
Page 44 of 72
EN 1870-19:2013
Clause
Requirement
Remarks - Results
Verdict
--
5.4
Protection against non-mechanical hazards
P
5.4.1
Fire
P
To minimize fire risk the requirements of 5.4.3 and 5.4.4
shall be met.
Also see 5.3.2.2 for avoiding contact between the main
saw blade and the scoring saw blade and 5.3.7.1.3 for
avoiding sparks as result of contact between the saw
blade and the machine table slot lining.
Verification: By checking the relevant drawings, inspection
of the machine and relevant functional testing of the
machine.
Checked ok
P
5.4.2
Noise
P
5.4.2.1
Noise reduction at the design stage
P
When designing machinery the information and technical
measures to control noise at source given in EN ISO
11688-1:2009 shall be taken into account. Also the
information given in EN ISO 11688-2:2000 may be taken
into account. The most relevant noise sources are the:
a) rotating main saw blade;
b) rotating scoring saw blade (if provided).
Considered.
P
5.4.2.2
Noise emission measurement
P
5.4.2.2.1
Noise emission measurement for circular saw
benches
P
The operating conditions for noise measurement shall
comply with Annex A of ISO 7960:1995.
Mounting and operating conditions of the machine shall
be identical for the determination of emission sound
Considered.
P