Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
301/346
UniSAB III (boot) and communication set-up
• The settings can also be exported directly to an SD card as seen below where all eleven Uni-
SAB III .xml files are already available on the card.
• You may also choose to save all the settings made in U Set as one .xls (excel) file. This file can-
not be uploaded to UniSAB III. The file can be saved with a Save or Save As command with the
file name and position you choose.
When the files have been exported or you have used the Save/Save As command you can close the U
Set program.
Download settings from UniSAB III
It is not possible to import or export directly from UniSAB III to U Set, you need to use a PC drive or SD
card as an intermediate storage.
To review, modify or print the configuration and settings in UniSAB III the relevant file(s) must be trans-
ferred from UniSAB III to your PC. This can be done by SD card or with a network connection:

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English