Johnson J10RSUR

24
SERVICE SPECIFICATIONS AND SPECIAL TOOLS
SPECIAL TOOLS
Powerhead
TYPICAL
Gearcase pressure tester
P/N 507977 (Stevens P/N S-34)
Gearcase vacuum tester
P/N 507982 (Stevens P/N V-34)
49794
1. Retaining ring pliers
P/N 331045
2. Replacement tip set
P/N 395967
2036
2 1
Crankshaft lower seal installer
P/N 433391(9.9-15 HP)
23660
Crankshaft upper seal remover/
installer kit P/N 391060 (9.9-15 HP)
23102
Cylinder bore gauge P/N 771310 45303
Rod screw torque socket
P/N 331638
000797
Ring compressor
9.9-15 HP standard: P/N 339754
9.9-15 HP oversize: P/N 339755
CO3768
Wrist pin bearing installer
P/N 336660
41029