103
Section 3 Operation
USE THE CARD
Note:
The C-MAP User C-Card should insert to an upper slot.
•Select USE THE CARD to display the FILES IN THE CARD list
that contains various stored files.
•The alphabets R, T, M, and S, which precede the administrative
number xxxx, stand for as follows.
R:ROUTE/WAYPOINT
T:TRACK
M: MARK
S:SETTING
•Turn the
Jog Dial
to scroll the FILES IN THE CARD list.
Note:
•If the message “NO CARD!” appears even if the C-MAP User C-Card is
inserted correctly, the data stored in the card may not be compatible with
the RADAR 1800 or the card is not initialized. Execute CARD
FORMAT before use.
Storing data in the card
•Press the
STORE
Soft Key and press the
Joystick
up or down to
specify a type of the data to store, and press the
Joystick
to store the
data.
Loading data from the card
•Press the
Joystick
up or down to specify the file to transfer and press
the
LOAD
Soft Key to transfer the file.
Erasing data file
•Press the
Joystick
up or down to specify the file to erase and press the
FILE
ERASE
Soft Key. After you confirm the message “ARE YOU
SURE?”, the file is erased.
Formatting a card
•Press the
FORMAT
Soft Key to format a card. After you confirm the
message, the card is formatted.
Note:
•When you format a card including data stored by MEMORY COPY, all
these data are deleted.
To Next Page
Loading...
