66
Section 3 Operation
ECHO
YELLOW
GREEN
ORANGE
COLOR
TRAILS
SKY
WHITE
GREEN
[To change a echo color]
•Select the “ECHO” in COLOR menu and push the
Joystick
, the
“ECHO” pull-down menu is displayed. Change settings by
Joystick
right or left and push
Joystick
.
In this menu, you can select a echo color in yellow, green, orange, or
color.
[To change a trails color]
•Select the “TRAILS” in COLOR menu and push the
Joystick
, the
“TRAILS” pull-down menu is displayed. Change settings by
Joystick
right or left and push
Joystick
.
In this menu, you can select a trails color in sky, white, or green.
PLANNED-TX MODE
The PLANNED-TX mode allows the operator to program the
radar automatically to transmit for a selected period of time, followed
by for a selected stand-by period.
This maintains a radar watch whilst reducing the power
consumption experienced during full transmit operation. In PLANED-
TX mode press the
STBY/OFF
and the radar will return to its normal
operating mode.
•Select the “TX-PLAN>” in RADAR SETTING menu and push the
Joystick
, the “TX-PLAN” menu is displayed.
[To turn on or to turn off TX-PLAN mode]
•Select the “TX PLAN” in TX-PLAN menu and push the
Joystick
,
the “TX PLAN” pull-down menu is displayed. Change settings to
ON/OFF by
Joystick
right or left and push
Joystick
.
[To set Transmitting Period]
•Select the “TX PERIOD” in TX-PLAN menu and push the
Joystick
, the “TX PERIOD” pull-down menu is displayed. Change
settings by
Joystick
right or left and push
Joystick
.
Each scan represents one revolution (turning) of the antenna.
[To set STBY Period]
•Select the “STBY PERIOD” in TX PLAN menu and push the
Joystick
, the “STBY PERIOD” pull-down menu is displayed.
Change settings by
Joystick
right or left and push
Joystick
.
Note:
• This function is inoperable in STBY mode.
OFF
20 SCAN
3 MIN
TX PLAN
TX PERIOD
STBY PERIOD
TX-PLAN
TX PLAN
OFF ON
TX PERIOD
10 SCAN
20 SCAN
30 SCAN
STBY PERIOD
3 MIN
5 MIN
10MIN
15MIN
To Next Page
Loading...
