TRACK
CONV.
(Converting a track to a planned
route)
•You can convert an arbitrary part of a track into a route
plan.
•Press the
TRACK
CONV.
Soft Key to display the TRACK-
ROUTE CONVERT chart and three Soft Keys
CANCEL
,
FINISH
, and
DIVIDE
.
Selecting a new route
•Move the cursor to select a point on a track as the start point and
press the
Joystick
. Similarly, select a point as the end point and press
the
Joystick
.
Press the
CANCEL
Soft Key to cancel the selection.
Press the
FINISH
Soft Key to display the calculated waypoints on the
track and the
MEMORY
Soft Key.
CANCEL MEMORY
POINT THE CURSOR TO THE
CONVERT SECTION:START-END AND
PRESS THE JOYSTICK.
TRACK-ROUTE CONVERT
2
End point
3
Waypoint marks appear
1
Start point
•Press the
MEMORY
Soft Key to display the NEW ROUTE popup
menu.
•Enter a name (up to eight characters) and a comment (up to 23
characters).
To Next Page
Loading...
