Constructing a rectangle
•You can construct a rectangle in the chart.
•You can use the rectangle you have constructed as the Alarm Area by
specifying it in the ZONE (Danger Zone Alarm). (Refer to p.101)
•Press the
RECT.
Soft Key to enter the RECTANGLE mode and
display the
COLOR
and
DELETE
Soft Key. Move the cursor to the
top left vertex of a rectangle you are going to construct and press the
Joystick
, and move the cursor along the diagonal line of the rectangle
to the bottom right vertex and press the
Joystick
again. While you
are moving the cursor after you press the
Joystick
once, a rectangle
appears in dotted line and it changes to a solid line when you press the
Joystick
. In the similar way, you can construct another rectangle.
Notes:
•To delete a constructed rectangle, move the cursor to one of the vertices and
press the
DELETE
Soft Key.
•You can select a color for a line or rectangle from the menu that appears
when you press the
COLOR
Soft Key.
To Next Page
Loading...
