JRC RADAR 1800 - Modify; Erase; Move; Goto a waypoint

80
Section 3 Operation
EDIT
• Press
MENU
MENU
, select EDIT> , and press
Joystick
to display the four
Soft Keys:
WAY
POINT
,
ROUTE
PLAN
,
TRACK
CONV.
, and
CONST -
RUCT
.
WAY
POINT
(Editing a waypoint)
•Press the
WAY
POINT
Soft Key to display the EDITING
METHOD menu.
•You can edit a waypoint in chart or by list. Press the
Joystick
up or down to select EDIT IN CHART or
EDIT BY LIST and push it in to complete the
selection.
EDIT IN CHART
• By selecting EDIT IN CHART, the full chart is displayed and 4 soft
keys are displayed.
• Select an icon with the soft keys, and you can select colors with the
soft keys.
Storing a waypoint
•Select a point you want to store as a waypoint. Press the
Joystick
to
move the cursor to select a point and push it in to complete the
selection.
•Press the
Joystick
to the left or right to select an item
Name: You can enter up to eight characters.
Comment: You can enter up to 23 characters.
•Press the
Joystick
to store the waypoint, to cancel, press
BR
BR
T/CLR
T/CLR
.
Notes:
• The smallest number is selected among unoccupied numbers.
• If there is no more memory to store a waypoint, the following message
appears.
•Press any key to delete the message, or it goes off automatically in about
seven seconds.
MEMORY FULL!
CANNOT REGISTER
THE NEW WAYPOINT.
ERASE ANY WAYPOINT.
NEW WAYPOINT
NO. 0
X SKY
N
42
°
28.429'
W122
°
19.716'
DIAMOND
MYRID OF SEA
URCHINS
_
___
POINT THE CURSOR TO THE
DESIRED WAYPOINT POSITION AND
PRESS THE JOYSTICK.
EDIT IN CHART
GREEN OBJECT
INFO
TIDAL
INFO
Y
EDITING METHOD
SELECT EDITING
METHOD
EDIT IN CHART
EDIT BY LIST