Modifying a waypoint
•Select a stored waypoint you want to modify. Press the
Joystick
to
move the cursor to select an icon of the waypoint and push it in to
complete the selection.
•Press the
Joystick
up or down to select MODIFY and push it in to
complete the selection.
•Press the
Joystick
to the left or right to select an item and press it up
or down or the
Jog Dial
to the left or right to modify each item.
Erasing a waypoint
•Select a stored waypoint you want to erase. Press the
Joystick
to
move the cursor to select an icon of the waypoint and push it to
complete the selection.
•Press the
Joystick
up or down to select ERASE and push it in to
complete the selection.
•Press the
Joystick
to the left or right to select YES or NO and push it
in.
Select YES to erase the selected waypoint.
If you select NO to cancel, the popup menu goes off without erasing
the selected waypoint.
Moving a waypoint
•Select a stored waypoint you want to move.
Press the
Joystick
to move the cursor to select an icon of the
waypoint and push it to complete the selection.
•Press the
Joystick
up or down to select MOVE and push it into
complete the selection, move the selected waypoint.
Go to a waypoint
•Select a stored waypoint you want to start navigation go to the point.
•Press Joystick to point a waypoint icon by cursor.
•Press Joystick down to select GOTO and push it. Then appear the
START NAVIGATION popup, select YES and press Joystick then
begin the navigation.
To Next Page
Loading...
