JRC RADAR 1800 - Radar Operation; Selecting a RANGE

56
Section 3 Operation
Changing settings:
• When settings are specified by numerical values, press the
Joystick
up or down to change the values. When settings are specified by bar
chart or by other items, press the
Joystick
to the left or right to
change the settings.
Entering changes:
• Push the
Joystick
to enter the change. If you want to cancel the
change, push
BR
BR
T/CLR
T/CLR
before completing it.
You can display the top Menu by pressing the
MENU
MENU
key.
Pressing the
MENU
MENU
again or
BR
BR
T/CLR
T/CLR
closes the menu.
Buzzer ON/OFF
• Press
MENU
MENU
, select the “ALARM SETTING>” and push the
Joystick
, the “ALARM SETTING” menu is displayed.
Select the “BUZZER” and push the
Joystick
, the “BUZZER” pop-
up menu is displayed.
Change settings to ON/OFF by pressing the
Joystick
to right or left.
Setting LANGUAGE
• When you push
STBY/OFF
STBY/OFF
to turn the power on while pushing
MOB
MOB
and
MENU
MENU
at the same time, the MASTER RESET
display and you can select your language. Press the
Joystick
up or
down to select a language and push it in to open MASTER RESET
type select display. Press the
Joystick
up or down to select HARD or
SOFT and push it in to select OK or CANCEL for the select
language and the reset type.
Press the
Joystick
to the left or right to select OK and push it in to
excute the MASTER reset. After the MASTER reset is executed, the
RADAR 1800 is rebooted automatically. To abort the MASTER reset,
select CANCEL and push the
Joystick
.
(Refer to “Master Reset and Language Select Operation” p.110)
MASTER RESET
SELECT YOUR LANGUAGE.
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
NORSK
ESPANYOL
MASTER RESET
SELECT RESETTING TYPE.
SOFT
HARD
SOFT:
INITIALIZE ALL SETTINGS
WITHOUT CLEAR WPT&ROUTE
DATA
HARD:
INITIALIZE ALL SETTINGS
WITH CLEAR WPT&ROUTE DATA.
MASTER RESET
YOUR SELECTS
ENGLISH
SOFT RESET
EXECUTE MASTER RESET.
ARE YOU SURE?
OK CANCEL
BUZZER
OFF ON