65
Section 3 Operation
CLEAR TRAILS
The trails are drawn for anything that move on screen, sometime
the screen will be filled by trails. You can clear the screen.
•Select the “CLEAR TRAILS” in RADAR SETTING menu and push
the
Joystick
, the “CLEAR TRAILS” pull-down menu is displayed.
Change settings to NO/YES by
Joystick
right or left and push
Joystick
.
WAYPOINT
If you are proceeding on waypoint/route navigation, a waypoint
symbol can be made to appear on the radar screen by activating the
WAYPOINT function in the RADAR SETTING menu.
When the waypoint distance is within the selected range scale, the
waypoint is displayed as a “O”.
Numeric information data appear at the Top Status information
area. (Refer to Vessel’s Information/Waypoint’s Information p.53)
•Select the “WAYPOINT” in RADAR SETTING menu and push the
Joystick
, the “WAYPOINT” pull-down menu is displayed. Change
settings to ON/OFF by
Joystick
right or left and push
Joystick
.
Setting Radar COLOR
In this menu, you can select a color for ECHO , TRAILS, Back-
ground of PPI area, and Background of Character area. There may
appear the following setting item. After select item, the popup menu
may appear, select a color by
Joystick
up or down and push
Joystick
.
•Select the “COLOR>” item in RADAR SETTING menu and push
the
Joystick
, the “COLOR” menu is displayed.
[To change a background of the PPI area color]
•Select the “INSIDE” in COLOR menu and push the
Joystick
, the
“INSIDE” pull-down menu is displayed. Change settings by
Joystick
right or left and push
Joystick
.
In this menu, you can select a background of the PPI area color in
black or blue.
[To change a background of the Character area color]
•Select the “OUTSIDE” in COLOR menu and push the
Joystick
, the
“OUTSIDE” pull-down menu is displayed. Change settings by
Joystick
right or left and push
Joystick
.
In this menu, you can select a background of the PPI area color in
black or blue.
BLUE
SKY
YELLOW
SKY
INSIDE
OUTSIDE
ECHO
TRAILS
COLOR
To Next Page
Loading...
