JRC RADAR 1800 - Editing a route; Adding a new waypoint; Editing a waypoint; ERASE

83
Section 3 Operation
ERASE WAYPOINT
ERASE
SELECTED WPT.
ARE YOU SURE?
YES NO
EDIT ROUTE PLAN
1 / 4
00 START:CAMBRIA
HIGHWAY
END :CAYUCOS
PLACID AND WARM WATERS
01 START:CAMBRIA
PANORAMA
END :MORROBAY
WITH BEAUTIFUL SCENES
02 START:CAYUCOS
OPAQUE
END :MORROBAY
AVOID OPAQUE WATERS
03
NEW ROUTE
NO. 0
ROUTE 0
____________
___________
MEMORY FULL!
CANNOT REGISTER
THE ROUTE.
ERASE ANY REGISTRY.
COPY WAYPOINT
NO. 0
N
42
°
28.429'
W122
°
19.716'
DIAMOND
MYRID OF SEA
URCHINS
COPY TO
NO. 2
N
__
°
__
.
___
'
____
°
__
.
___
'
________
____________
___________
Copying a waypoint
•Select a waypoint number you want to copy.
•Press the
Joystick
up or down, or press the
Jog Dial
to the left or
right to select a number to which you want to copy the waypoint.
Note:
•If the selected number to which you copy the waypoint is already used, the
contents are overwritten.
Erasing a waypoint
•Select a stored waypoint you want to erase. Press the
Joystick
to
move the cursor to select an icon of the waypoint and push it to
complete the selection.
•Press the
Joystick
to the left or right to select YES or NO and push it
in.
Select YES to erase the selected waypoint.
If you select NO to cancel, the popup menu goes off without erasing
the selected waypoint.
JUMP
(Jumping to a waypoint list page)
•Press the
JUMP
Soft Key and set page in the menu.
ROUTE
PLAN
(Planning a route)
Press the
ROUTE
PLAN
Soft Key to display the EDIT
ROUTE PLAN list and two Soft Keys
NEW
ROUTE
and
ALL
ERASE
.
NEW
ROUTE
(Storing a new route)
•Press the
NEW
ROUTE
Soft Key or select a vacant route
number to display the NEW ROUTE popup menu.
•Enter a name (up to eight characters) and a comment
(up to 23 characters).
•Press the
Joystick
to complete the entry.
•Press
BR
BR
T/CLR
T/CLR
to cancel the entry.
Notes:
•If the maximum number of routes is stored already, the following message
appears.
•Press any key or wait about seven seconds to delete the message.