110
Section 3 Operation
Master Reset and Language Select
Operation
RESET
There are two type of reset: MASTER RESET and CUSTOM SETUP.
(Refer to p.102)
MASTER RESET
•A MASTER RESET can be performed by either the SOFT Reset or
HARD Reset. The SOFT Reset restores all set values except the
WAYPOINT data and ROUTE PLAN data to the original factory
set-up values. The HARD Reset restores all set values to the original
factory-set values and deletes the WAYPOINT and ROUTE PLAN
data. When you want to keep the WAYPOINT and ROUTE PLAN
data, execute the SOFT Reset. When the MASTER RESET is
executed, The CUSTOM PRESET is initialized to the factory-set
defaults.
•When you push
STBY/OFF
at the same time, the LANGUAGE SELECT
display appear. Press the
Joystick
up or down to select a language and
push it in to open MASTER RESET type select display. Press the
Joystick
up or down to select HARD or SOFT and push it in to
select OK or CANCEL for the select language and the reset type.
Press the
Joystick
to the left or right to select OK and push it in to
executed the MASTER RESET.
After the MASTER RESET is executed, the RADAR 1800 is
rebooted automatically. To abort the MASTER RESET and language
select, select CANCEL and push the
Joystick
.
Note:
•When a backup error occurs, the RADAR 1800 enters the MASTER
RESET mode automatically, and language select menu opens. In this case,
you cannot abort the MASTER RESET. Be sure not to turn the power off
during the MASTER RESET.
MASTER RESET
SELECT YOUR LANGUAGE.
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
NORSK
ESPANYOL
MASTER RESET
SELECT RESETTING TYPE.
SOFT
HARD
SOFT:
INITIALIZE ALL SETTINGS
WITHOUT CLEAR WPT&ROUTE
DATA.
HARD:
INITIALIZE ALL SETTINGS
WITH CLEAR WPT&ROUTE DATA.
MASTER RESET
EBL BEARING REL
YOUR SELECTS
ENGLISH
SOFT RESET
EXECUTE MASTER RESET.
ARE YOU SURE?
OK CANCEL
To Next Page
Loading...
