46
Section 3 Operation
No. Keys Functions
r RANGE Sets range scale by SOFT Key.
t JOY-STICK Position cursor setting.
Up/Down/Right/Left: Selects and changes an item when each
menu is displayed.
Push: Fixes the set value when each menu is displayed.
Enters a marker when no menu is displayed.
Registers EVENT in the NAVIGATION mode.
y NAV Executes or stops navigation to the desired waypoint or of the
planned route.
u MODE Switches among the Radar and Plotter mode displays.
i EBL/VRM Activates EBL or VRM on the display.
A short press will turn on/off selected EBL/VRM.
Press and hold, to select and control the desired EBL or VRM by
rotating the
Jog Dial
.
o CENTER To shift own ship on radar screen in Radar mode and Radar/
Chart mode.
!0 BRT/CLR Press and hold, set the brightness or contrast of the LCD with
Joystick
or
Jog Dial
.
Acknowledge of alarm.
Abort setting value.
!1 TX/OFF Turns transmitter ON and activates Radome.
Press
STBY/OFF
keys simultaneously to turn off.
!2 STBY/OFF Turns ON power to Display and Scanner and activates 90 second
count-down timer.
Press to go into Stand-by mode while in the Transmit mode.
Press
STBY/OFF
keys simultaneously to turn off.
!3 Soft Keys Correspond to Soft Keys displayed at the bottom of the screen.
There may appear up to four Soft Keys according to the displayed
screen.
!4 Card Slot A built-in world map is available on C-MAP electronic chart.
(C-MAP Card) Card slot available for more detailed local C-Map charts.
!5 PC I/F Port Connect a personal computer for saving and loading navigation
data and user settings.
To Next Page
Loading...
