1. Verify that the installaon is successful and the EX9200-SF2 is online by issuing the show chassis
environment cb command:
user@switch> show chassis environment cb 0
CB 0 status
State Online
Temperature 30 degrees C / 86 degrees F
...
user@switch> show chassis environment cb 1
CB 1 status
State Online
Temperature 30 degrees C / 86 degrees F
...
Other details, such as, temperature, power, etc are also displayed along with the state.
2. Verify that the fabric planes come online correctly by issuing the show chassis fabric summary command:
user@switch> show chassis fabric summary
Plane State Uptime
0 Online 2 days, 19 hours, 10 minutes, 9 seconds
1 Online 2 days, 19 hours, 10 minutes, 9 seconds
...
3. Verify that the backup Roung Engine is back online by issuing the show chassis routing-engine 1
command:
user@switch> show chassis routing-engine 1
Routing Engine Status:
Slot 1:
Current State Backup
...
4. Verify that the EX9200-SF2s appear in output from the show chassis hardware command:
user@switch> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN1221A03RFC EX9204
Midplane REV 01 750-053633 ACRA1451 EX9204-BP
FPM Board REV 04 760-021392 ABCB4822 Front Panel Display
232
To Next Page
Loading...
Need help?
General
