Juniper EX9214

Do not rest any edge of a line card directly against a hard surface. See Figure 2.
Figure 76: Do Not Rest the Edge of a Line Card on a Hard Surface
If you must rest a line card temporarily on an edge, place a cushion between the edge
and the surface.
Do not stack line cards on top of one another or on top of any other component. Place
each line card separately in an anstac bag or on an anstac mat placed on a at,
stable surface.
Storing a Line Card
You must store a line card in the chassis or in a spare shipping container, horizontally and sheet metal
side down. Do not stack line cards on top of one another or on top of any other component. Place each
line card separately in an anstac bag or on an anstac mat placed on a at, stable surface.
249