Juniper EX9214

Table 6: FRUs in an EX9200 Switch (Connued)
FRU Type
SFP, SFP+, QSFP+, and CFP transceivers
See Pluggable Transceivers Supported on
EX9200 Switches for the Junos OS release in
which the transceivers were introduced.
Hot-insertable and hot-removable.
NOTE: Line cards are not part of the base or redundant conguraon. You must order them
separately.
NOTE: If you have a Juniper J-Care service contract, register any addion, change, or upgrade of
hardware components at hps://www.juniper.net/customers/support/tools/updateinstallbase/ .
Failure to do so can result in signicant delays if you need replacement parts. This note does not
apply if you replace exisng components with the same type of component.
EX9214 Chassis
IN THIS SECTION
Understanding EX9214 Switch Component and Funconality Redundancy | 28
Cra Interface in an EX9200 Switch | 29
Midplane in an EX9200 Switch | 36
Cable Management Bracket in an EX9214 Switch | 39
27