Juniper EX9214

Table 6: FRUs in an EX9200 Switch
FRU Type
Power supplies Hot-insertable and hot-removable.
Fan tray and air lter Hot-insertable and hot-removable.
Roung Engine module (RE module) Redundant conguraon:
• Primary RE module is hot-pluggable.
• Backup RE module is hot-insertable and hot-removable.
Base conguraon:
• You must disable the switch before removing any RE
module. See Taking the Host Subsystem Oine in an
EX9200 Switch
.
See EX9204 Switch Conguraons , EX9208 Switch
Conguraons , and "EX9214 Switch Conguraons" on page
9.
Switch Fabric module (SF module) Redundant conguraon:
• Primary SF module is hot-pluggable.
• Backup SF module is hot-insertable and hot-removable.
Base conguraon:
• You must disable the switch before removing any SF
module. See Taking the Host Subsystem Oine in an
EX9200 Switch
.
See EX9204 Switch Conguraons , EX9208 Switch
Conguraons , and "EX9214 Switch Conguraons" on page
9.
Line cards Hot-insertable and hot-removable. We recommend that you
take the line cards oine before removing them. See Removing
a Line Card from an EX9200 Switch .
26