Juniper EX9214

Table 4: CLI Equivalents of Terms Used in Documentaon for EX9214 Switches
Hardware
Item (CLI)
Descripon (CLI) Value (CLI) Item in
Documentaon
Addional
Informaon
Chassis EX9214 – Switch chassis "Chassis Physical
Specicaons of an
EX9214 Switch" on
page 20
Midplane EX9214-BP3 – Switch midplane "Midplane in an
EX9200 Switch" on
page 36
FPM Board Front Panel Display – Cra interface "Cra Interface in an
EX9200 Switch" on
page 29
PEM ( n ) One of the
following:
• PS 4.1 kW;
200-240 V AC in
• DC 2.4 kW
Power Entry
Module
n is a value in the range
0-3. The value
corresponds to the
power supply slot
number.
AC or DC power
supply
• "AC Power Supply
in an EX9214
Switch" on page
43
• "DC Power Supply
in an EX9214
Switch" on page
52
Roung
Engine ( n )
One of the
following:
• RE–S–EX9200
–1800X4
• RE–S–EX9200
–2X00x6
n is a value in the range
0-1.
In a base conguraon,
only one entry appears.
In a redundant
conguraon, two
entries appear–one for
each Roung Engine
module (RE module)
installed in the chassis.
RE module Roung Engine
Module in an EX9200
Switch
15