Juniper EX9214

Table 27: Line Card Models for EX9200 Switches (Connued)
Model number Descripon First Junos OS Release SF Module Required
EX9200-15C A line card with 15 rate-selectable
ports. All ports can operate at 10-
Gbps, 25-Gbps, 40-Gbps, or 100-
Gbps speeds
See EX9200-15C Line Card
20.3R1 EX9200-SF3
EX9200-32XS A line card with 32 10-Gigabit
Ethernet ports
See EX9200-32XS Line Card
12.3R2 EX9200-SF, EX9200-
SF2, or EX9200-SF3
EX9200-40T A line card with 40
10/100/1000BASE-T ports that
support RJ-45 connectors
See EX9200-40T Line Card
12.3R2 EX9200-SF or EX9200-
SF2
EX9200-40F A line card with 40 1-Gigabit
Ethernet ports
See EX9200-40F Line Card
12.3R2 EX9200-SF or EX9200-
SF2
EX9200-40F-M A line card with 40 1-Gigabit
Ethernet ports with Media Access
Control Security (MACsec) capability
See EX9200-40F-M Line Card
14.2R1 EX9200-SF or EX9200-
SF2
EX9200-40XS A line card with 40 10-Gigabit
Ethernet ports with Media Access
Control Security (MACsec)
capability, each of which can house
10-gigabit small form-factor
pluggable plus (SFP+) transceivers
See EX9200-40XS Line Card
16.1R1 EX9200-SF2 or
EX9200-SF3
Ensure that all of the line cards in a switch are supported in the Junos OS release that you want to use.
83