Getting Started
2–4 PKG 3114 0106
E-Plex Advanced ACS User’s Guide
At this time, you should also physically install the Palm Cradle (or HotSync Cable) for the
Palm by attaching it to your PC’s USB port or the serial port, depending on your Palm PDA’s
interface connector.
Software Registration and Installation
Kaba Access Control’s E-Plex Advanced ACS software requires you to register your
individually licensed copy of the software with Kaba Access Control in order to use the
software. Registering the software will help secure your system database and the locks on
your site and will also aid Kaba Access Control in making you aware of any new software
upgrades, patches, etc. when required.
On the jewel case of the E-Plex Advanced ACS software CD, you will see a sticker with the
6-digit Serial Number for the software and an 8-digit Factory Number. You will use both of
these numbers to register the software.
The registration process is quite simple, and you can register the software in one of two
ways:
• Register online at Kaba Access Control’s software registration website, anytime of the
day or night (24/7).
• Register by calling our Technical Support line at 800-849-8324 or 336-735-1331, Monday
through Friday between 8:00 AM and 5:00 PM Eastern Standard Time.
Important: You will not be able to install the software if you do not complete the
registration process with Kaba Access Control.
Software Registration
Complete the following steps to register the software:
1. Insert the E-Plex Advanced ACS Installation CD into the appropriate drive of the PC.
2. The E-Plex Advanced ACS Software Installation Browser loads and displays the E-Plex
Advanced Access Control Software browser menu.
To Next Page
Loading...
Need help?
General
