Using the E-Plex Advanced ACS Software
E-Plex Advanced ACS User’s Guide
PKG 3114 0106 3–53
Printing Reports
Complete the following steps to print a report:
1. From the report window, click Print. The software displays the Print window:
2. Click OK. The software sends the report to the printer and confirms that the report is
complete:
Note: On some printers, the printed column alignment of a report may not be correct. If
this happens, save the file as a text file (the default folder to save Reports is
C:\Program Files\Kaba\EPlexAdvancedACS\Reports). Later, you can retrieve the
saved report through Windows Explorer, and then print it to get a properly aligned
report.
3. Click OK again. The software returns to the report window.
4. Click Close. The software returns to the Reports Menu window.
Saving a Report
Complete the following steps to save a report.
1. To save the report to a text file, click Save. The software displays the Save As window
and prompts you for the file name:
2. Type a report name in the File name field.
To Next Page
Loading...
