Using the E-Plex Advanced ACS Software
E-Plex Advanced ACS User’s Guide
PKG 3114 0106 3–39
Note: You should update your locks to reflect modified door groups by programming
the M-Unit and uploading the information to the locks. For more information, refer to M-
Unit Handheld PDA in Chapter 5,
Programming and Auditing Locks.
Access Assignment
The Access Assignment function allows you to assign each door—one at a time—its access,
granting door and user configuration.
From this menu, you must select a door and assign the door schedules, holidays/vacations,
and the users who should have access to this door. When you assign the access schedules
to the door, you must also specify if the door schedule requires PIN access, Prox Card
access (for E-Plex 5700 only), or dual credential access (for E-Plex 5700 only). Also, for each
user type, you must also assign a schedule and optionally assign any one or more of the
following three privileges:
• Override holidays/vacations
• Override deadbolt
• First user passage entry
Finally, you can optionally enable the Passage Mode function (by default, it is disabled). After
this process, the lock configuration data is set up and prepared to be HotSynced to the
M-Unit and then uploaded to the door/lock.
To manage door access assignment, select Manage Access Assignment from the Access
Assignment menu, or click the Manage Access Assignment button.
The software displays the Manage Access Assignment window:
From this window, you can manage door access assignment, including:
• Assigning access schedules
• Assigning holidays/vacations
• Assigning users
To Next Page
Loading...
Need help?
General
