Using the E-Plex Advanced ACS Software
3–2 PKG 3114 0106
E-Plex Advanced ACS User’s Guide
System Setup Menu
The System Setup menu allows you to define and maintain global system settings that, in
most cases, you need to do only once during the initial system setup.
To access system settings, select an option from the System Setup menu or click the
System Setup menu icon.
Changing System Settings
You should establish the system settings before you begin using the E-Plex Advanced ACS
on a daily basis. However, you can use this feature at any time if you need to update or add
to the existing information.
Click on the System Settings option. The system displays the System Setup menu.
1. Edit the following data areas as desired:
• Door Group Association
Here you can do one of two things:
o Change the existing global Master PIN for the entire system (i.e., all locks in
all Door Groups).
o Assign different Master PINs for different Door Group locks.
• Manage Door Group Masters
Once you have selected one of the above two options, enter the changed Master PIN
in the Master PIN field, and re-enter the PIN in the Verify PIN field.
Note: You must remember to change the factory Master PIN default of 12345678
to the new Master PIN entered here in the software for the system to work properly.
To Next Page
Loading...
Need help?
General
