Using the E-Plex Advanced ACS Software
3–6 PKG 3114 0106
E-Plex Advanced ACS User’s Guide
Changing an Operator Password
The Change Password option allows you to change an Operator’s password. Complete the
following steps to change an Operator’s password:
1. From the System Setup menu, select Change Password. The software displays the
Change Password window.
2. From the Operator Name drop-down list, select an Operator.
3. In the Current Operator Password field, enter the current logon password of the
Operator.
4. In the New Operator Password field, enter the new six-character logon password for the
Operator.
Note: The Operator password must be exactly six characters long, and can consist of
numbers, characters, spaces, and special characters (i.e. ~!@#$%^&*, etc.).
5. In the Verify New Password field, re-enter the new password.
6. In the Operator Level field, type the level of the Operator.
7. Click OK. The software displays confirmation that the password changed successfully.
8. Click OK again. The software closes the Change Password window.
To Next Page
Loading...
Need help?
General
