Description of the Servo controller ServoOne software functionality (Single-Axis
System and Multi-Axis System) as well as ServoOnejunior
ID No.: 0842.26B.5-01
Information valid as of: 08.2020
Effective as of firmware version
l V4.30-xx(ServoOnejunior)
l V4.30-xx(ServoOneSingle-AxisSystemandMulti-AxisSystem)
l V274.30-xx(ifyouneedtousehydraulicparameters,seeSection"Hydraulic
control"onpage175fordetails)
The structure of this help, as well as the screenshots used, were taken from
KeStudioDriveManager5 Version 5.6.
The German version is the original version of this documentation.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
2