KEISOKU GIKEN LOAD EDGE Series User Manual

Load Edge Series
122 Maintenance
Chapter 11 Maintenance
For your longer use of this product, please maintain and check periodically.
11.1 Cleaning
To remove dust and dirt, wipe them away with a soft or slightly wet close.
・ Power this product OFF first and pull the plug of the AC cable of its socket before
you clean this product.
・ Please do not use any organic solvent, for example, benzene , acetone , or the
like, that would damage the plastic materials. And pay attention to prevent any
fluid like such solvent from penetrating into the inside of the chassis of this
product.
11.2 Fuse
To replace a fuse in this product, please follow the instructions below.
・ Power this product OFF first and pull the plug of the AC cable of its socket before
you replace the fuse therein.
・ Do not use any other fuse then is specified in this manual. And if you used a fuse
other than originally equipped with this product, the fuse with which you replace
should have a certificate of safety standard in your country.
・ Do not shorten in the fuse holder.
・ If you find a phenomenon of abnormal smell or sound that seem to be defective,
contact us or dealer that you purchased this product from without further usage.
C
A
U
T
I
O
N
C
A
U
T
I
O
N
W
A
R
N
I
N
G

KEISOKU GIKEN LOAD EDGE Series Specifications

General

Brand	KEISOKU GIKEN
Model	LOAD EDGE Series
Category	Measuring Instruments
Language	English