Load Edge Series
Safe Usage 3
For safety operation
This is an instruction for safety operation.
Please read the manual and follow all safety notes.
Please understand that we are not responsible for any accidents caused by wrong operation or
usage not following the safety note or cautions.
Prohibition of breakup
Never remove the cover or a panel since high voltage portion
exists inside that might cause injury to the body of operator.
Setting environment
For security reasons, do not use this product in the
environment where explosive and corrosive gasses exist.
Never use this product in where strong electric - magnetic
field because the heavy electric-magnetic field influences to
the unit.
Place this product on a flat surface and under no direct
sunshine. Also avoid to place where high humidity is
expected.
The operating environment condition of this product is
(Temperature : 23℃±5℃ / The humidity : Less than
70%RH).
Do not use this product when condensed dew. Don‟t use this
unit until it becomes completely dry.
Do not use this unit at dusty place or on a slope or place
where has much vibration.
Keep good distance from this unit to a wall.
Do not block air outlet of this product to have good air
circulation for cooling.
To Next Page
Loading...
Need help?
General