Load Edge Series
4 Safe Usage
input power
Use at rated voltage only. (Input rating : AC 100 V～240 V
50/60 Hz )
In addition, use the power supply cable attached to this product.
(attached cable rating : AC 125 V)
When used abroad, use a power cable suitable for the shape and
rating for the power supply.
fuse
A replacement fuse is contained in the AC inlet.
Use the same shape and rating fuse only when necessary
(250V/3.15A)
operator
This product can be operated by only someone who is enogh
capable to understand this manual and after understanding all
contents of this manual.
An operator does not have enough knowledge must be
supervised by capable person.
Connections
In the case of connection or disconnection of GPIB unit, cut off
the power supplies of each product first.
To Next Page
Loading...
Need help?
General