Load Edge Series
34 Operations
4.2 Menu selection
There are three (3) menus available in this product.
・LOAD CONTROL you can setup about load.
・MEASURE SETUP you can setup about measurement.
・I/O – MEMORY you can setup GP-IB address and I/O.
First of all, it is necessary to select proper menu mode.
To select proper menu, press MENU key to display menu select window.
Fig. 4-2-1 Selection Menu of Manu
Press MENU key or the rotary knob to select menu.
(Underscored item represents a selected item)
Press ENT key or the rotary knob to confirm the menu selected.
(You can abort by pressing CE key.)
To Next Page
Loading...