Load Edge Series
Product Outline 15
1.3 Applications
The following shows examples of the applications with this product.
・ Test for low voltage power supplies for a micro processor.
・ Large current fast pulse load test.
・ Evaluate solar batteries
・ Replace a load switch
・ Evaluate the characteristics of battery‟s charge/discharge behavior
・ Evaluate a capacitor
・ Evaluate a current sensor
・ Evaluate a relay
・ Evaluate electronic double-layer capacitor.
・ Evaluate the I-V characteristics of a fuel cell
・ Measure AC impedance of a fuel cell
・ Evaluate power semiconductor etc.
1.4 Options
The following options are provided.
Low inductance cable
** Values shown here are typical values
Ripple Noise converter
RC-02A (Factory option)
The LL-05, LL-100 and LL-200 are built to order. Ask us for availability.
The ripple & noise measurement module is a factory option only.
Please order when ordering electronic load.
The ripple noise converter is a factory option and you cannot purchase this RC-02A alone
and add this option by yourself. With this option, measurement of the ripple noise can be
controlled via GPIB and USB.
Contact a dealer you purchased from or KG directly for any questions.
To Next Page
Loading...
Need help?
General