KEISOKU GIKEN LOAD EDGE Series User Manual

Load Edge Series
Operations 39
4.5 Memory function
You can save up to six (6) group of setting conditions, and recall any of those conditions
freely.
Parameters that you can save in this memory function are as follows:
・Currently selected load mode
・Load setting value(s) in each load mode
・Load response speed (slew rate) in each load mode
・Current limit value
・Parameters for dynamic load operation
(1) STORE
In I/O – MEMORY menu,
Press F2 to display a window showing a number for saving.
Press F2 key or turn the rotary knob to display No. you want to select.
Press ENT key or the rotary knob to confirm the No. you selected.
Fig. 4-5-1 How to set “STORE”
Data with the same number will be overwritten with new data.
(2) RECALL
In I/O – MEMORY menu,
Press F3 to display a window showing a No. for recalling.
Press F3 key or turn the rotary knob to display No. you want to select.
Press ENT key or the rotary knob to confirm the No. you selected.
Fig. 4-5-2 How to set “RECALL”
F
2
o
r
P
u
s
h
N
O
T
E
F
3
o
r
P
u
s
h

KEISOKU GIKEN LOAD EDGE Series Specifications

General

Brand	KEISOKU GIKEN
Model	LOAD EDGE Series
Category	Measuring Instruments
Language	English